Electric motor housing milling

1. MaxiMill SEC12 milling cutter with suction

  • Rough and semi-finish machining | Face milling with chip-free component
  • PCD-equipped cutting inserts, robust and yet smooth cutting
  • Plug & play (no pre-setting required)

Technical data
Dimensions: Ø 50/63/80/100/125/160 mm as standard
Type: SEC12
Vc: 1,000 – 3,500 m/min; Fz: 0.1–0.25 mm
Ap max: 8 mm 

2. HPC-PCD milling cutter

Finishing flat surfaces

  • Finishing flat surfaces
  • Highest linear feedrates for low cycle-time thanks to 3D-printed rings and tooth count

Technical data
Dimensions: Ø 40/50/63/80/100 mm
Type: HPC
Vc: 1,000 – 4,000 m/min
Fz: 0.04–0.12 mm
Ap max: 3 mm

Cutting diameter (mm) Cutting speed (m/min)
100 2,500
Speed (rpm)
Tooth number
7958 12
Cutting depth (mm) Cutting width (mm)
3 20
Setting angle
Feed rate per tooth (mm/tooth)
90 0.2
Feed per revolution (mm/rev) Feed rate (mm/min)
2.4 19100
Cutting length (mm)
Rake angle
600 15
Average chip thickness (mm) Main time (s)
0.09 2.04
Torque (Nm)
Drive power (KW)
35.96
31.53
Cutting diameter (mm) Cutting speed (m/min)
100 3,000
Speed (rpm)
Tooth number
9546 32
Cutting depth (mm) Cutting width (mm)
1 20
Setting angle
Feed rate per tooth (mm/tooth)
90 0.12
Feed per revolution (mm/rev) Feed rate (mm/min)
3.84 36658
Cutting length (mm)
Rake angle
600 0
Average chip thickness (mm) Main time (s)
0.04 0.98
Torque (Nm)
Drive power (KW)
18.28 18.23