This website uses cookies in order to guarantee the best possible service. By continuing to use this site, you agree to the use of cookies. For more information, see our privacy policy.

Knowledge
  • Good self-centring
  • Optimum chip breakage
  • High run-out accuracy
  • Excellent alignment precision
  • High surface quality
  • Close bore tolerances
  • Low peripheral zone hardening of the material
  • Solid carbide high-performance drill for all materials up to 1200 N/mm²
  • Solid carbide high-feed drill with three cutting edges
  • Excellent positioning accuracy
  • For double the cutting speed
  • The asymmetrical point geometry means the hole machining performance for steel and cast iron is increased by up to 60 %
  • With additional guide lands for best alignment precision, concentricity and position accuracy
  • For inclined surfaces up to 45° and flat bottomed holes
  • Solid carbide deep hole drills, up to 50xD without peck drilling
  • Four- or six-chamfer head geometry for excellent alignment precision
  • First choice for stainless and acid-resistant steels for series production
  • Solid carbide high-performance drill specifically for machining aluminium, copper and brass
  • Six guide lands for best drilling quality
  • For cast iron materials up to 250 HB
  • Straight flute
  • Specialist for the cost-effective machining of titanium, titanium alloys and heat-resistant alloys
  • For hardened steels from 46 to 65 HRC 
  • Cutting edges and flute geometry tailored to carbide, special core diameter
  • Solid carbide micro drill for the precise manufacture of very small holes from Ø 0.1 mm to 2.9 mm
     
  • Exchangeable head drill with the performance level of a solid carbide drill, from Ø 12.0 mm to 41.0 mm
  • Solid carbide high-performance drill reamer
  • Drilling and reaming in one operation