Hole machining with standard tools
Techncal data
Size: 2,5-20mm
Type: 5-30xD
Vc: 250-400 m/min
F: 0,4-0,8 mm/U
| Tool diameter (mm) | Cutting speed (m/min) |
| 10 | 360 |
| Spindle speed (rpm) |
Tooth number |
| 15910 | 2 |
| Hole depth (mm) | Feed per revolution (mm/rev) |
| 30 | 0,45 |
| Feedrate (mm/min) | Feed Force (N) |
| 5155 | 1153 |
| Main machining time (s) | Torque(Nm) |
| 0,35 | 4,58 |
| Spindle power (kW) | |
| 5,49 |
Hole machining with special tools
Technical data
Size: from 6mm diamter and up
Type: PCD drill
Vc: 500+ m/min
F: 0,2+ mm/U
Ap: Variable
| Tool diameter (mm) | Cutting speed (m/min) |
| 10 | 500 |
| Spindle speed (rpm) |
Tooth number |
| 15910 | 2 |
| Hole depth (mm) | Feed per revolution (mm/rev) |
| 30 | 0,3 |
| Feedrate (mm/min) | Feed Force(N) |
| 4652 | 628 |
| Main machining time (s) | Torque (Nm) |
| 0,41 | 2,49 |
| Spindle power (kW) | |
| 4,15 |