↩ back to overview

Machining the engine mount

Powerful cutting tools for drilling, roughing and finishing high-alloy materials

No tolerances are permitted when it comes to safety – especially in the development of engine mounts. They are subject to enormous stresses when taking off and landing, which is why only the most toughest materials can be used. These materials in turn need to be machined with the highest levels of accuracy and process security.

Welcome aboard – we already have the solutions you need.

1. MaxiMill 211 90° shoulder milling system

Universal with 90° setting angle for various applications on medium-sized and large areas

Indexable insert system for machining large pockets, for plunging or for universal applications
Special insert design, perfect for plunge milling
Comprehensive product range
Suitable for various milling strategies and applications
Cutting material grade CTCS245 developed for machining Ni-based alloys

2. MaxiMill 271

Face milling cutter for cost-effective roughing with large cutting depths and reduced power consumption

8 cutting edges per indexable insert
Max. ap up to 8.4 mm! (17 mm insert)
Double-sided indexable insert with integrated clearance angle for reduced power consumption

3. MaxiDrill 900 indexable insert drill

Productive drilling of large and medium diameter holes

Drilling of large and medium diameters
PVD-coated universal grade for all common materials
One indexable insert for centre and peripheral cutting
Great performance even in difficult machining situations
High alignment accuracy thanks to four guide lands

Article no.:50737_DIN1835B

MaxiMill – End milling cutter C 211-11

CERATIZIT Performance

To product (11)

Article no.:50767

MaxiMill – A 271 Face mill

CERATIZIT Performance

To product (8)

Article no.:10853

MaxiDrill 900 – Indexable insert drill

KOMET Performance

To product (77)

back to overview