Drilling and turning with the EcoCut multifunctional tool
The Swiss army knife of cutting tools reduces setup times and increases your productivity. But the multifunctional tool can do even more!
The multifunctional tool for a wide range of applications
Be it drilling with a stationary or rotating tool or turning of face, inside and outside profiles, the EcoCut is the leading tool for a wide range of applications. The EcoCut tools are available in three versions: EcoCut Classic, EcoCut Mini and EcoCut ProfileMaster.
EcoCut Classic
The EcoCut Classic is the indexable insert version, which can be used to machine diameters between 8 and 32 mm.
You can see the EcoCut Classic in use in the video.
EcoCut Mini
The EcoCut Mini is a solid carbide variant of the tool for holes from Ø 2 – 8 mm.
You can see the EcoCut Mini in action in the video.
EcoCut ProfileMaster
The EcoCut ProfileMaster is suitable for holes from a diameter of 10 mm. Axial and radial grooves can also be made.
The EcoCut ProfileMaster in use:
Fewer tool changes thanks to a wide range of machining processes
EcoCut is designed so that up to four different machining processes can be performed using this one tool. Different machining processes are combined, eliminating the need to change tools. The setup time is drastically reduced and machine utilisation is increased.
Drilling,
stationary or rotating
Turning
face profiles
Turning
inside profiles
Turning
outside profiles
Impressive performance in the processing of steel
The introduction of different carbide grades with DRAGONSKIN coating also ensures machining of a wide range of materials and different applications, but in steel machining in particular, the EcoCut achieves excellent results with the correct indexable insert. The supplementary -P brings with it the update for machining ISO-P steels. This enables the user to either optimise their cutting data and perform machining faster, or stick to their tried and tested parameters and benefit from a longer tool life.
NEW CTCP425-P
- New CVD coating
- Outstanding wear resistance
- For high cutting speeds
NEW CTCP435-P
- New CVD coating
- For poor machining conditions
- Where a high degree of toughness is required
1. Gold-coloured indicator layer - TiN
2. Multilayer - AI2O3
3. Highly textured base layer - Ti (C, N)
Your added value thanks to the update
- New EcoCut ISO-P grades → ideal machining conditions in steel
- Gold-coloured indicator layer → rapid insert detection
- Optimised layer structure of the Dragonskin coating → longer tool life
ISO-P grade update for EcoCut indexable inserts
- Higher cutting data
- Reduced machining times
Buy suitable EcoCut indexable inserts for an extremely wide range of machining operations:
NEW CTCP425-P
- New CVD coating
- Outstanding wear resistance
- For high cutting speeds
27P H216T
- 1st choice for non-ferrous metals
- Periphery ground
- Polished clamping flat
NEW CTCP435-P
- New CVD coating
- For poor machining conditions
- Where a high degree of toughness is required
27Q H210T
- Wear-resistant carbide grade for machining non-ferrous metals
- Periphery ground
- With wiper geometry
CTCP430
- TiAlN PVD coating
- For universal machining
- For stainless steel, heat-resistant materials, steel, cast iron
Stable, secure and superior thanks to the Torx Plus system
Increasing the cutting speeds and feeds also makes it important to increase the security of the indexable insert clamping. This is where the Torx Plus system comes in. Torx Plus screws improve the transfer of the tightening torque and simplify handling. The indexable insert is often the focus of the improvement process. However, by using our Highlight coating, we have increased the performance of the tool holder itself. This silver-coloured nickel coating reduces friction and thus wear on the tool holder due to friction, is partly responsible for optimising the chip flow and, at the same time, still offers aesthetic appeal. What's more, the chip flow for tools with a length/diameter ratio of 2.5 is supported by the use of a coolant jet directed backwards.
