Type overview | WTX high-performance drilling tools

  • Good self-centring
  • Optimum chip breakage
  • High run-out accuracy
  • Excellent alignment precision
  • High surface quality
  • Close bore tolerances
  • Low peripheral zone hardening of the material


  • Solid carbide high-performance drill for all materials up to 1200 N/mm²

Feed Uni

  • Solid carbide high-feed drill with three cutting edges
  • Excellent positioning accuracy


  • For double the cutting speed
  • The asymmetrical point geometry means the hole machining performance for steel and cast iron is increased by up to 60%

Quattro 4F

  • With additional guide lands for best alignment precision, concentricity and position accuracy


  • Solid carbide micro drill for the precise manufacture of very small Ø 0.8 - 2.9 mm holes in 5xD, 8xD, 12xD, 16xD and 20xD lengths.
  • High-performance deep hole drills in Ø 1.0 - 2.9 mm in the lengths 25xD, 30xD


  • Specialist for the cost-effective machining of titanium, titanium alloys and heat-resistant alloys


  • Four-edged drilling tool
  • Extremely aggressive and precise drilling performance, thanks to the innovative pyramid geometry
  • Particularly suitable for machining steel


  • Solid carbide micro drill for the precise manufacture of very small holes from Ø 0.1 mm to 2.9 mm


  • For inclined surfaces up to 45° and flat bottomed holes


  • Solid carbide deep hole drills, up to 50xD without peck drilling
  • Four- or six-chamfer head geometry for excellent alignment precision


  • First choice for stainless and acid-resistant steels for series production


  • Solid carbide high-performance drill specifically for machining aluminium, copper and brass
  • Six guide lands for best drilling quality


  • For cast iron materials up to 250 HB
  • Straight flute


  • Exchangeable head drill with the performance level of a solid carbide drill, from Ø 12.0 mm to 41.0 mm


  • For hardened steels from 46 to 65 HRC 
  • Cutting edges and flute geometry tailored to carbide, special core diameter


  • Three-edged solid carbide high-performance drill reamer.
  • Spot drilling, drilling and reaming to a tolerance of H7 in just one operation

Feed BR

  • Solid carbide high-performance drill reamer
  • Drilling and reaming in one operation

Would you like professional advice to help you select the right drilling tool? Then get in touch with us now!