CircularLine CCR | End mills for trochoidal milling
Do you want to machine deep slots, high flanks, small pockets, and more, both efficiently and economically? Then CircularLine CCR milling cutters are the perfect choice –
because our CircularLine is specially designed for trochoidal milling, with special control cycles that enable consistent tool clinching
and the average chip thickness to be maintained.
Efficient machining of slots, flanks, pockets, and more.
CircularLine milling cutters have an adapted surface coating, are particularly robust and wear-resistant, and can easily withstand even high temperature fluctuations during the machining process.
In combination with their sharp cutting edges and effective chip breakers, the milling cutters provide optimum conditions for machining slots, flanks, pockets, etc. economically and cost-efficiently.
The strengths of CircularLine CCR milling cutters:
- Tool geometries and coatings perfectly tuned to the material
- Cutting depths up to 5xDC possible
- Reduced machining costs thanks to a significant increase in cutting data compared to conventional machining
- Short chips due to chip breaker on the main cutting edge
- Low heat generation as a result of short contact times of the tool with the workpiece, which makes it possible to increase the cutting speed
- Extremely high feed rates can be achieved due to the small width of cut of the tool
- Highly process-secure machining strategy
- Low machine load due to the low depths of cut of the tool
- Irregular pitch of the cutting edges suppresses vibrations and ensures extra-long tool life
- Special core geometry makes the tool stable, while also being sufficiently flexible to absorb the radial cutting forces
- No "localised" wear of the cutting edge due to utilisation of the entire cutting edge length
Our customers are impressed
"When we witnessed the milling cutter in action it just blew me and my colleagues away! We stood around the machine like a group of kids, watching as the small 6 mm CCR milling cutter went in almost 25 mm deep and then the chips were flying. It was crazy!"
Bernd Iwanow,
Inventor of the Fracebike
Find out more about machining the Fracebike with CircularLine
Buy CircularLine CCR milling cutters in the online shop now
CircularLine CCR milling cutters are available in different versions and with corresponding coatings to suit the material and machining process. Discover our entire range in our online shop now:
